Skip to Content Skip to Navigation

Waterless lamb frenching: reducing 210,000 knifing path actions per shift to zero

Opportunity for

  • Solution providers wanting to demonstrate and evolve an offering in 'waterless frenching' and demonstrate it in meat processing environments
  • Solution providers wishing to validate conceptual designs and/or build and evaluate initial prototypes that reduce human effort, water and energy consumption

Opportunity description

Industry challenge: Repetitive knife cutting actions typically employed by operational staff in Australia to produce “frenched” lamb racks create both a WHS repetitive strain and knife laceration safety concern. With each 8-rib rack requiring at least 21 knife actions (and up to 23), this activity results in up to 210,000 knife actions per operational shift within a plant operating at 10 carcases per minute. Frenching is also the final point of product presentation handling (and inspection) prior to a consumer purchasing the product.

Current situation: In Australia, most processing facilities rely on operational staff with knives to undertake this activity. There are instances in Australian plants using the McLaren Stainless water frenching solution. Although this solution works well it is not suitable for all Australian locations due to the water usage, water source, and resulting trade waste additional load with the product (intercostals) and water being discharged to drain. For these reasons, some Australian processors (39%) would prefer to use a waterless solution.

Past R&D: The industry has supported a number of investigations into waterless frenching including using wire cutting, ice jet cutting and robotic knives. These have all had a level of success but none to date have resulted in a commercial product offering.

  • Wire cutting (Report link)
  • Ice jet cutting (Report link)
  • Using needles to determine where the intercostals/ribs locations are (Report link)
  • An industry report on the implementation of the McLaren iFrench unit, a commercially viable unit that is compact and simple to use (Report link)

Current opportunity

AMPC would like to hear from providers/developers who believe that they could develop a solution that:

  1. Remove operational staff from knifing (and holding) the product. Of the two removing the knife actions is the main foci (and hence semi-automated solutions are also an acceptable consideration).
  2. Uses no water (during operations).
  3. Recovers the intercostal as a saleable product item. Ideally can remove the intercostals as a single 'finger' of meat.

AMPC is seeking submissions from providers/ developers that are wanting to validate conceptual ideas and/or are ready to build and evaluate those designs in an engineering workshop.

Image source: https://www.weber.com/NZ/en/recipes/red-meat/rack-of-lamb/weber-428839.html

Opportunity type

Seeking interest, Research partner, Field trial

Readiness

Early (TRL 1-4)
Describes the challenge or opportunity being pursued and undertakes preliminary R&D to determine if the concept is feasible.
What does this mean?
Describes the stage of the challenge or opportunity being pursued.

Project led by

Multiple industries
Beef Other rural industries Pasture, fodder & feed

Australian Meat Processor Corporation (AMPC)

The Australian Meat Processor Corporation (AMPC) is the Rural Research and Development Corporation (RDC) that supports the red meat processing …

Multiple industries
Beef Other rural industries Pasture, fodder & feed
  • Location

    Australia

  • Organisation type

    Research funding body

Logo for Australian Meat Processor Corporation (AMPC)

Industries

Sustainabilities

Related commercial opportunities

Search all commercial opportunities
Logo for Waterless knife sterilisation for meat processing plants
Multiple industries

Waterless knife sterilisation for meat processing plants

Opportunity for

  • Solution providers wanting to develop new solutions for sterilisation of knives and other tools for Australian red meat abattoirs. Participants may be: 
    • Wishing to brainstorm and evaluate (without substantially building) new approaches (this can be initially focussed and limited to knife sterilisation) 
    • Ready to build and evaluate designs for new approaches 
  • Led by

    Australian Meat Processor Corporation (AMPC)

  • Opportunity type

    Seeking interest, Research partner, Field trial

  • Readiness
    Early (TRL 1-4)
    Describes the challenge or opportunity being pursued and undertakes preliminary R&D to determine if the concept is feasible.
Logo for 'Steak to Primal' traceability (software or hardware)
Multiple industries

'Steak to Primal' traceability (software or hardware)

Opportunity for

  • Software and hardware solution providers or developers looking for financial support to demonstrate and evolve offerings in 'steak to primal' traceability and demonstrate it in a meat processing environment
  • Existing traceability providers who would like support to extend their offer to deliver a 'steak to primal' solution
  • New providers interested in addressing the 'last mile' and integrating with existing traceability providers or providing that directly as part of a traceability solution
  • Led by

    Australian Meat Processor Corporation (AMPC)

  • Opportunity type

    Seeking interest, Research partner

  • Readiness
    Early (TRL 1-4)
    Describes the challenge or opportunity being pursued and undertakes preliminary R&D to determine if the concept is feasible.
Logo for Red meat bone belt automated monitoring solution
Multiple industries

Red meat bone belt automated monitoring solution

Opportunity for

  • Imagery solutions providers or developers seeking financial support to demonstrate and evolve your offering in red meat monitoring on bone belts to measure and manage red meat discharging on the bone belt to acceptable levels
  • Led by

    Australian Meat Processor Corporation (AMPC)

  • Opportunity type

    Seeking interest, Research partner

  • Readiness
    Early (TRL 1-4)
    Describes the challenge or opportunity being pursued and undertakes preliminary R&D to determine if the concept is feasible.

Looking for engagement?

Showcase your commercialisation opportunity today.

Talk to our team to discuss how growAG. can connect your innovation to industry.

Have questions? Find answers to our most frequently asked questions on research projects, commercial opportunities, organisations and more.